Today we are welcoming Claire from A Little CLAIREification,  who is sharing her super cute and easy DIY Bird Feeder .

 How’s your Summer been going, my LWSL friends? It’s me, Claire from A Little CLAIREification, and I just cannot believe my boys start back to school next week!

We have tried to pack in as much fun as possible over the break and, earlier this Summer, my Littlest and I decided to make a little DIY Bird Feeder. We have a sweet  pair of cardinals that live in the bushes just outside of our screened in pool patio and it’s so much fun watching them flit around – we love how they talk back and forth to each other. You can also pop over to my blog for more fun crafts like these DIY Glittery Glow Jars and I hope you’ll say hello while you’re there!!

Here’s how we did it on the cheap mostly using items we already had on hand.

Items needed for the easy DIY Bird Feeder!

Here Is What You Need:

1.5 Liter Water Bottle (I like the square kind for this, such as Fiji) A round plant drip tray, at least 5″ across
Spray paint (color of your choice)
Painter’s tape
Two wooden spatulas (optional)
Stencil pattern of your choice (optional – we used a bird stencil from Amazon)
Acrylic paint (your choice of color)
Jute twine (or picture hanging wire)
Eye hook (not pictured but shown below)
Hot Glue (or heavy duty glue such as Gorilla Glue)
Bird Seed
Start with the plant tray first for the easy DIY Bird Feeder.

Step 1:  To start, we taped off the lip of the plant tray since we didn’t want little bird feet getting paint on them. Could be toxic! You’ll see that several steps here are optional like this one but I thought it would be fun to have the feeder be aqua so once the lip was taped off we spray painted it and let it dry for a couple of hours.

The next step of the easy DIY Bird Feeder is for the adults: Trimming the water bottle.

Step 2:  While that was drying, I used a craft knife to cut a couple of inches off the bottom of the water bottle – this is definitely a step that adults should do. I used scissors to even out any rough spots and make it sit level.

Step 3 of the easy DIY Bird Feeder is to make arches in the water bottle.

Step 3:  Next we used a Sharpie to make a half circles / arches on each side of the bottom of the bottle and then we used scissors to cut out. This is so the bird seed can flow out into the tray. If using a round water bottle, just evenly space out 2-3 little arches.

Paint a pretty picture on your easy DIY Bird Feeder!

Step 4:  We love our little bird stencils we found on Amazon but you could use whichever pattern you like. We cut out the one we wanted to use and taped it on the bottle to secure it, and then my Littlest painted it. Now, I added the spatulas and I am going to tell you this right now. I wouldn’t bother if we did it again. I thought it would give a a little landing spot for the birds and envisioned the bird seed flowing out onto them. This was not the reality.

Adding spatulas is an optional step in the easy DIY Bird Feeder project.

Step 5:  I basically cut a small hole and a larger hole on two opposite sides so the handle could go through and out the other side. They look kind of cute, I know, but it really was an unnecessary step. In the end, I had to use clear packing tape to cover the holes so I feel like you should learn from this trial and error. The cardinals told us they didn’t care, by the way.

Add an eye hook to the easy DIY Bird Feeder for hanging!

Step 6:  We screwed a little eye hook into the cap for hanging. I actually added a little hot glue inside the cap for extra support because… well, “it’s for the birds” right?

The next step of the easy DIY Bird Feeder project is to trace the water bottle for glue placement.

Step 7: Next we placed the water bottle inside the tray and traced around with a Sharpie so I could place the hot glue in the right spot. I actually used both hot glue AND a little Gorilla Glue because… I did not want this to fall apart once it was hung, especially if a random squirrel decided to jump on board for lunch!

We're getting there! Add birdseed to your easy DIY Bird Feeder.

Step 8:  Glue the water bottle into the planter and allow to dry for several hours. Next, funnel your bird seed into the finished Bird Feeder and hang using the twine. While it might take a few days, be prepared for your fabulous little feathered friends to notice. I sooo wish I could have gotten a closer pic but those smart cardinals were hip to my jive (not to mention my children are loud).

Hang the easy DIY Bird Feeder and wait for the guests to arrive!

Her bright red Husband wasn’t willing to sign a photo release but he loves the bird feeder too. 😉

The easy DIY Bird Feeder is a fun summer project to create with the kids!

 *   *   *

What kind of wildlife visits your backyard?

Claire is a working Mama to three boys, a self-proclaimed cheese addict and a lover of all things crafty and delicious. Her blog, A Little CLAIREification, is a lifestyle blog committed to bringing readers “Bright Ideas On A Budget” – from cooking, baking, crafting and DIY projects to time management tips, meal planning and inspiration.

Latest posts by Claire (see all)


Ever feel like you just can't keep up? Our Living Well Starter Guide will show you how to start streamlining your life in just 3 simple steps. It's a game changer--get it free for a limited time!

If you love this resource, be sure to check out our digital library of helpful tools and resources for cleaning faster, taking control of your budget, organizing your schedule, and getting food on the table easier than ever before.